How To Take Apart And Clean An Xbox One Controller
We put the Xbox One controller through a lot. Compatible with several devices (particularly PCs) as well as the Xbox I, this controller gets banged, dropped, and grimy. Hand grease, sweat, food, and other detritus can be found over the surface and in nooks and crannies.
Then in that location'south issues with the feedback motors, buttons, and thumb sticks. In brusk, your Xbox One controller needs looking after. To do this, yous need to know how to have apart the Xbox Ane controller, clean it, repair it, and reassemble it.
4 Reasons to Take Apart an Xbox One Controller
Your Xbox I controller gets a lot of action. As a result, information technology needs to be regularly maintained. Beyond occasionally wiping the buttons clean, you probably don't do this.
Withal, maintenance to ensure long term performance from the controller requires you need to know how to safely take the Xbox I controller autonomously. This might exist to:
- Repair or replace a thumbstick
- Repair or replace a button or trigger
- Check battery connections
- Make clean any dirt that has accumulated around the controls
Go on reading to learn how to open your Xbox One controller for cleaning and repairs. Note that these steps are specifically for Microsoft-produced Xbox 1 and Xbox I S controllers rather than later on or 3rd party devices. If you take a third-party Xbox One controller, these typically characteristic eight screws than tin be removed with a small Philips screwdriver.
Having said that, you lot tin use this guide to open a first generation Xbox Series X/South controller.
What You Will Need to Detach Your Xbox One Controller
Opening an Xbox One controller isn't every bit easy as cracking open up an old radio. You tin't apply standard screwdrivers to get inside an Xbox One controller. Instead, yous'll demand a Torx screwdriver---and that's not all:
- Torx screwdriver (T8 or T9, depending on controller model)
- Flathead screwdriver
- Plastic prying tools (guitar plectrum/selection is a good substitute)
- Plastic spudger or disposable knife
Don't accept all the tools needed to gain access to your Xbox One controller'due south interior? Worry non---various Xbox I controller tool kits tin can exist bought online.
How to Take Autonomously a Microsoft Xbox One Controller
The process for opening the Xbox One controller is straightforward with the right tools.
- Remove the bombardment cover and whatsoever batteries
- Remove the grip plastic
- Unscrew the five Torx screws
- Lift the rear cover from the controller
- Elevator the internals away from the front fascia
Below we'll go through the steps in more detail. Annotation that opening a first generation Xbox Series X/South controller follows the same procedure.
How to Open up the Xbox 1 or Xbox Series 10/Due south Controller
Before proceeding, ensure your Xbox One controller is powered off. Place it on a table or like difficult surface with the tools within easy reach.
Follow these steps to open the Xbox One controller.
- Remove the door to the battery compartment and set it aside.
- Remove the batteries, saving them for after.
- Using the plectrum or spudger, detach the plastic panels on the back of the controller'southward "handles" where the controller sits in your paw. This can have a while, and so have your time patiently wiggling the plectrum forth each edge to unclip them.
- With the controller face down, unscrew the five Torx screws. You lot'll find ii on the left, two on the right, and another below the label in the battery compartment. Put the screws aside safely for later.
- The dorsum panel should now simply lift off.
- Yous can at present elevator out the main controller. Detect how this is a secondary plastic example, which houses a pair of PCBs (printed excursion boards).
- At this stage you can now supercede thumbsticks, D-pad, and the other buttons if y'all're planning on some customizations.
Farther disassembly at this stage requires some electronics knowledge so don't go on if you're inexperienced with PCBs and electrical components (meet below).
Congratulations---yous've successfully taken autonomously your Xbox One controller.
You Opened Your Xbox One Controller: What Next?
You at present have your Xbox One controller in pieces on your surface. But what can you do next? Here are some ways y'all might go along.
1. Clean Your Xbox One Controller
Keeping your controller clean is highly recommended, whatever the circumstances. From hygiene steps to manage infection control to keeping the Xbox One controller buttons responsive, cleaning is of import.
Microsoft recommends isopropyl alcohol for cleaning dirt; use cotton swabs to clean difficult to reach areas. Most cleaning will accept identify around the plastic components. If yous take a small vacuum cleaner, suitable for electronics, apply this to collect whatsoever loose dirt that falls out of reach.
In one case reassembled, use disinfectant wipes to deal with infection risks.
2. Repair the Xbox One Controller Thumbstick
Diverse repairs tin can be performed once the Xbox Ane controller is open. Unresponsive buttons can exist checked (often fixed with additional cleaning) and thumbsticks repaired.
The Xbox One controller is prone to thumbsticks (joysticks) coming loose. In most cases this problem tin be resolved by gluing a minor pole of metal---peradventure from a thumbtack---into the thumbstick itself and pushing this into the analogue controller mounted on the circuit board.
3. Fully Teardown Your Xbox One Controller
Want to know more about how your Xbox Ane controller works? Consider a full teardown, stripping the device downwardly to only the PCBs. Y'all might even take this a step further and detach the triggers, thumbsticks, buttons, and more.
Be aware that a farther teardown will expose electric components. Equally such, you will need to take precautions to deal with the risk of static electricity damaging your controller.
Going further, four thin wires tin be found on the left and right side of the controller (eight wires in full). Two wires on each side are for the rumble motor, while the other four connect the two PCBs. These tin be de-soldered with care, but this is only really necessary if you lot're stripping information technology down for replacement components.
The PCBs, meanwhile, can be detached from the interior plastic chassis by removing four modest screws.
Take care labelling and annotating the process, notwithstanding, or else you'll stop up with a controller you can't play with!
four. Customize the Xbox One Controller
Violent down is also a smashing manner to add customizations (new LEDs, etc.) to your Xbox One controller. Even so, more striking customizations to your controller's appearance tin exist made with a can of paint and adhesion promoter.
Reassemble an Xbox 1 Controller
When you're satisfied the Xbox One Controller is ready to employ again, but follow the instructions above in contrary to reassemble the device.
Whether you lot've cleaned it or made a repair, once reassembled your Xbox 1 controller should be working equally normal once over again. If non, consider buying a replacement controller, or looking at other troubleshooting steps.
Near The AuthorSource: https://www.makeuseof.com/how-to-take-apart-an-xbox-one-controller/
Posted by: albrechtfait1939.blogspot.com
0 Response to "How To Take Apart And Clean An Xbox One Controller"
Post a Comment